Enhancement of nitrogen removal by a modular design of vertical flow constructed wetlands with a plant carbon source: Optimization of carbon dosage for nitrogen removal, practicability evaluation and strategy exploration for water quality control

Abstract

The requirement of artificial aeration for increasing nitrogen removal in vertical flow constructed wetlands (VFCWs) brings extra energy consumption and complex maintenance. The feasibility of a modular design to replace artificial aeration for partially saturated VFCWs with palm bark as a carbon source (PSVFCW-pb) to achieve water quality control, especially nitrogen removal was evaluated. The PSVFCW-pb with a spatially separate structure and perforated peripheries for better oxygen diffusion had a promising total nitrogen removal (e.g., 66.4% at a dosage of 1.435 g/L of palm bark pretreated at 120 °C for 40 min) without additional aeration, while organic carbon removal was nearly unaffected. An appropriate increase of the palm bark dosage (≤1.435 g/L) resulted in higher nitrogen removal; however, a more palm bark (1.875 g/L) could not further increase nitrogen removal but caused color pollution. In addition, the removal of nitrogen by the modularized PSVFCW-pb was more sensitive to the ambient temperature than the removal of organic carbon and phosphorus, and the higher temperature was preferable. Notably, the more attractive property of the modular design is its great potential to improve nitrogen removal by conveniently altering the number and/or scale of oxic and oxygen-free modules. Finally, the relationships between the hydraulic load and inflow concentration were explored, by which the suitable hydraulic load could be flexibly adjusted based on real-time water quality to meet the specified surface water quality criteria in different seasons. This study provides a reliable CW design for controlling nutrient pollution in surface waters.