Abstract
We investigate two types of internal light-extraction layer structures for organic light-emitting diodes (OLEDs) that consist of silica nanoparticles (NPs) embedded in high-refractive-index TiO₂ matrices. The composite of silica NPs and TiO₂ matrices was coated on the glass substrate and fabricated with and without a SiO₂ planarization layer. An increase in the optical out-coupling efficiency by a factor of 2.0 was obtained at a high luminance of 3,000 cd/m² from OLEDs containing the silica NPs embedded in TiO₂ matrices between glass substrates and Zn-doped In₂O₃ (IZO) electrodes after additional planarization processes. This is consistent with the analytical result using the finite-difference time-domain (FDTD) method. Randomly distributed silica NPs acting as scattering centers could reduce the optical loss when extracting light. By using additional planarization processes with a PECVD-derived SiO₂ layer, one can assure that smoother surfaces provide higher out-coupling efficiency, which attain 100% and 97% enhancements in power (lm/W) and current (cd/A) efficiencies, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
