Enhancement of insulating properties of polyethylene blends by delocalization type voltage stabilizers

Abstract

This paper reports on the effects of four voltage stabilizers, m-aminophenylboric acid, 2-methoxy-5-pyridineboric acid, m-aminobenzoic acid and 4-dimethylaminobenzoic acid, on the insulation properties of polyethylene blends. 1 wt% voltage stabilizers were added into low density polyethylene (LDPE) blend containing 10 wt% high density polyethylene (HDPE) by a solution method. Physicochemical and electrical properties of the blends were analyzed by infrared spectroscopy, thermo-gravimetric analysis, differential scanning calorimetry, electric tree initiation tests, space charge and surface potential decay measurements. The results showed that the addition of the voltage stabilizers had a little effect on the thermal stability and melting properties of the LDPE/HDPE blend. When the voltage stabilizers were included into the blends, the tree initiation voltage (TIV) increased, in particular the blend with m-aminobenzoic acid showed the highest increase of 41% compared to the reference LDPE/HDPE. It was found that space charge accumulations of the blends were apparently suppressed by adding voltage stabilizers. Moreover, the blend with the m-aminobenzoic acid had the least space charge accumulation. The surface potential decay rate of the blends was significantly increased after adding voltage stabilizers. Quantum chemical calculations illustrated that the HOMO-LUMO energy gap was closely related to the TIV of the blends, whereas the m-aminobenzoic acid has the lowest energy gap level and the best effect of restraining the electrical tree initiation. The trap level calculation showed that the trap depth in the blends decreased with the addition of the voltage stabilizers, which was beneficial to suppress the accumulation of space charge in the materials.