Abstract
This research presents a new idea in the use of wireless communication antennas: it uses a multi-layered array of cells called a superstrate multi-layer metasurface (MTM) and is placed in front of a patch of microstrip antenna to absorb surface waves and prevent them from passing through the insulating material, which reduces the permeability of the insulator and thus improves the Antenna properties, The proposed hexagonal cell with resonators is placed on the flame resistant (FR4) substrate, with a relative permittivity of 4.3 and an area (14×14) mm2 . It was tested when the metasurface layer is 4 mm in front of the patch and the distance between the metasurface layers is 2 mm. The optimum distances were calculated by the sweep parameter, and the improved antenna gain and the input reflection coefficient were obtained together. (S11) has been improved from -31.217 to -38.338 dB and, the gain from 3.28 dB to 6.554 dB.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Indonesian Journal of Electrical Engineering and Computer Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
