Enhancement of corrosion resistance of mild steel in NaCl solution with an eco-friendly silane coating containing nanoclay and zinc acetylacetonate

Abstract

Listen

Translate article

PurposeThis paper aims to enhance the barrier properties and active protection of a water-based silane coating on mild steel through nanoclay and zinc acetylacetonate simultaneously included into the formulation.Design/methodology/approachThe corrosion protection performance of the silane sol-gel coatings with no additive, zinc acetylacetonate, nanoclay and nanoclay + zinc acetylacetonate was monitored using electrochemical impedance spectroscopy during 5 h of immersion in a sodium chloride solution. Moreover, the surface of coatings was analyzed using a field emission scanning electron microscopy equipped with an energy dispersive X-ray spectrometer (FESEM-EDX) and water contact angle measurements.FindingsIn electrochemical impedance spectroscopy analysis, the impedance at low frequencies, coating resistance and charge transfer resistance were the parameters considered which indicated the superiority of silane coating formulated with both nanoclay and zinc acetylacetonate. According to the results of FESEM/EDX and water contact angle measurements, the superiority was linked with the enhancement in the barrier properties in the presence of nanoclay, as well as function of the corrosion inhibitor at coating–substrate interface.Originality/valueAccording to the literature, there is no research conducted to study the impact of the simultaneous use of nanoclay and zinc acetylacetonate on the barrier properties and active protection of an eco-friendly silane sol-gel coating including glycidyloxypropyltrimethoxysilane, tetraethoxysilane and methyltriethoxysilane on mild steel in a sodium chloride solution.