Enhancement of Absorption and Effectiveness of a Perovskite Thin-Film Solar Cell Embedded with Gold Nanospheres

Abstract

This paper proposes a novel design of plasmonic perovskite solar cell (PSC). It consists of an anti-reflective glass of fluorine-doped tin oxide (FTO), a compact buffer layer of n-type titanium dioxide (TiO2), an absorbing thin-film layer of perovskite (MAPbI3) integrated with gold (Au) nanospheres, a layer of p-type doped spiro-OMeTAD, and a layer of the cathode on aluminum (Al). This multilayer design’s primary purpose is to allow the light to enter the PSC with the minimum reflection and trap it in the active layer due to the presence of Au nanospheres. In this layer, the higher efficiency of PSC is achieved by localized surface plasmon resonances (LSPRs) in the wavelength range from 300 to 1100 nm. A reflective Al layer is used at the bottom of the device to reflect the light into the upper layers to considerably enhance the PSC absorption. The three-dimensional finite-difference time-domain method was conducted to find the best solution to Maxwell’s equations so that the best thickness and radius can be selected for each layer and Au nanospheres, respectively. Proper physical dimensions and Au nanospheres played a significant role in numerically indicating that the proposed structures are 60% more absorbent than the other conventional PSCs. In-house simulation software is used to approximate the solar cell by applying the finite element method to develop solutions for the drift–diffusion and Poisson’s equations. The examinations of the previous studies revealed that the current study is the first study that has simulated the real model of Auger recombination in perovskite. The results indicated that the proposed PSC embedded with Au nanospheres has the following properties: the built-in potential of 3.16 V, short-circuit current of 27.97 mA/cm2, the open-circuit voltage of 1 V, maximum power of 24.84 mW/cm2, fill-factor of 0.88, the conduction band of 3 eV, electron quasi-Fermi level of 2.5 eV, the hole quasi-Fermi level of 0.6 eV, and efficiency of 24.84%. Finally, the suggested PSC has performed 62% more efficient than conventional PSCs.