Enhancement in the photocatalytic and antimicrobial properties of ZnO nanoparticles by structural variations and energy bandgap tuning through Fe and Co co-doping

Abstract

In this study, pure ZnO and iron (Fe) and cobalt (Co) co-doped ZnO nanoparticles were synthesized by varying Fe and Co concentrations using the co-precipitation method. The physical properties of as-prepared samples were investigated through XRD, FTIR, SEM, and UV–vis spectroscopy. X-ray diffraction confirmed the strong influence of Fe and Co ions on structural parameters without disturbing the basic ZnO hexagonal structure. The microstructural study was executed by using the Scherrer, W–H, and SSP methods. FTIR confirmed the presence of Zn–O, and Zn–M–O (M = Fe, Co) vibrational modes, which further confirmed the successful incorporation of dopants ions. The energy bandgap (Eg) extracted from UV–vis spectra has shown red-shift (3.37–2.7 eV) for decreasing Fe contents, whereas blue-shift (3.37–3.39 eV) for increasing Co concentration. SEM was used to investigate surface morphology, which represents the high rate of agglomeration. The photocatalytic test was performed on grown samples against various dyes and also observed the effects of varying concentrations of Fe and Co ions. The maximum degradation efficiency (98.8%) at 6%Fe and 4%Co under direct sunlight in 60 min against methylene blue (MB) was achieved. The photocatalytic activity of optimized concentration (6%Fe and 4%Co) was further tested against cresol red (CR), methyl orange (MO), safranin-O (SO), rhodamine-B (RhB), and methyl red (MR) dyes. The maximum degradation efficiency against MR dye (96.0%) was observed. The antibacterial test against Staphylococcus aureus and Klebsiella pneumoniae bacterial strains have shown that co-doped ZnO nanoparticles have a higher activity as compared to pristine ZnO, and furthermore, the sample with 6%Fe and 4%Co concentration exposed the highest antibacterial actively for both bacterial strains.