Abstract
Strontium ferrite (SrFe12O19) nanofibers and 20wt% of P(VDF-HFP)/SrFe12O19 composite films were prepared by electrospinning and solution casting method respectively. The structure and morphology of the SrFe12O19 nanofiber were characterized by X-ray diffraction and Field emission scanning electron microscopy. The result confirmed the formation of SrFe12O19 nanofiber with a diameter of 150nm with hexagonal structure. The structural changes in P(VDF-HFP) from α to β phase, indicates that fiber fillers are well dispersed in polymer matrix. The dielectric constant of the composite film increases from 12 to 39 with an addition of 20 wt% filler content.Strontium ferrite (SrFe12O19) nanofibers and 20wt% of P(VDF-HFP)/SrFe12O19 composite films were prepared by electrospinning and solution casting method respectively. The structure and morphology of the SrFe12O19 nanofiber were characterized by X-ray diffraction and Field emission scanning electron microscopy. The result confirmed the formation of SrFe12O19 nanofiber with a diameter of 150nm with hexagonal structure. The structural changes in P(VDF-HFP) from α to β phase, indicates that fiber fillers are well dispersed in polymer matrix. The dielectric constant of the composite film increases from 12 to 39 with an addition of 20 wt% filler content.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
