Enhancement in Capacitance of Ionic Type of EAP-Based Strain Sensors

Abstract

This paper aims to enhance the capacitance of electroactive polymer (EAP)-based strain sensors. The enhancement in capacitance was achieved by using a free-standing stretchable polymer film while introducing conducting polymer to fabricate a hybrid dielectric film with controlled conductivity. In this work, styrene-ethylene-butylene-styrene (SEBS) rubber was used as the base material, and dodecyl benzene sulfonate anion (DBSA)-doped polyaniline (PANI) was used as filler to fabricate a hybrid composite conducting film. The maleic anhydride group of the SEBS Rubber and DBSA, the anion of the polyaniline dopant, make a very stable dispersion in Toluene and form a free-standing stretchable film by solution casting. DBSA-doped polyaniline increased the conductivity and dielectric constant of the dielectric film, resulting in a significant enhancement in the capacitance of the EAP-based strain sensor. The sensor presented in this article exhibits capacitance values ranging from 24.7 to 100 µF for strain levels ranging from 0 to 100%, and sensitivity was measured 3 at 100% strain level.