Enhanced Wettability Alteration by Surfactants with Multiple Hydrophilic Moieties

Abstract

AbstractThe main production mechanism during water flooding of naturally fractured oil reservoirs is the spontaneous imbibition of water into matrix blocks and resultant displacement of oil into the fracture system. This is an efficient recovery process when the matrix is strongly water‐wet. However, in mixed‐ to oil‐wet reservoirs, secondary recovery from water flooding is often poor. Oil production can be improved by dissolving low concentrations of surfactants in the injected water. The surfactant alters the wettability of the reservoir rock, enhancing the spontaneous imbibition process. Our previous study revealed that the two main mechanisms responsible for the wettability alteration are ion‐pair formation and adsorption of surfactant molecules through interactions with the adsorbed crude oil components on the rock surface. Based on the superior performance of surfactin, an anionic biosurfactant with two charged groups on the hydrophilic head, it was hypothesized that the wettability alteration process might be further improved through the use of dimeric or gemini surfactants, which have two hydrophilic head groups and two hydrophobic tails. We believe that when ion‐pair formation is the dominant wettability alteration mechanism, wettability alteration in oil‐wet cores can be improved by increasing the charge density on the head group(s) of the surfactant molecule since the ion‐pair formation is driven by electrostatic interactions. At a concentration of 1.0 mmol L−1 a representative anionic gemini surfactant showed oil recoveries of up to 49% original oil‐in‐place (OOIP) from oil‐wet sandstone cores, compared to 6 and 27% for sodium laureth sulfate and surfactin, respectively. These observations are consistent with our hypothesis.