Enhanced Water Management and Fuel Efficiency of a Fully Passive Direct Methanol Fuel Cell With Super-Hydrophilic/ -Hydrophobic Cathode Porous Flow-Field

Abstract

Water management is a critical issue for a direct methanol fuel cell (DMFC). This study focuses primarily on the use of a super-hydrophilic or super-hydrophobic cathode porous flow field to improve the water management of a passive air-breathing DMFC. The flow field layer was made of an in-house copper-fiber sintered felt (CFSF) which owns good stability and conductivity. Results indicate that the super-hydrophilic flow field performs better at a lower methanol concentration since it facilitates water removal when the water balance coefficient (WBC) is high. In the case of high-concentration operation, the use of a super-hydrophobic pattern is more able to reduce methanol crossover (MCO) and increase fuel efficiency since it helps maintain a lower WBC due to its ability in enhancing water back flow from the cathode to the anode. The effects of methanol concentration and the porosity of the CFSF are also discussed in this work. The cell based on the super-hydrophobic pattern with a porosity of 60% attains the best performance with a maximum power density of 18.4 mW cm−2 and a maximum limiting current density of 140 mA cm−2 at 4 M.