Abstract
In the present work, pure BiFeO3 (BFO) particles were synthesized by sol-gel method and mixed with carbon fibre to form composites (x%CFs-BFO, where x corresponds to 0, 4, 8 and 10 wt.%) by hydrothermal treatment at 150?C. The resulting composite powders were characterized by X-ray diffraction, Raman spectroscopy, nitrogen adsorption/desorption isotherm and scanning electron microscopy (SEM-EDX). The synthesized powders were used for gas sensors preparation by manual deposition of their mixture with polyvinyl alcohol on alumina tubes ending with two silver electrodes. The impedance of the sensitive layers was determined by impedance spectroscopy in the temperature range 100-250?C at different gaseous concentrations. The detection properties of the fabricated sensors for various volatile organic compounds were investigated. The sensors showed better sensitivity to acetone compared to other gases. The addition of carbon fibres improved the sensitivity to acetone vapour from 64 to 135% at 100 ppm and reduced the optimum operating temperature of the sensors by 20?C and the response and recovery times from (26 s/15 s) to (18 s/10 s). This study revealed that x%CFs-BiFeO3 composites are promising candidates for gas sensors.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
