Abstract

In this paper, the effect of dewetted gold nanoparticles (AuNPs) on hexagonal boron nitride (hBN) is discussed along with the changes in surface plasmon resonance (SPR). Au is sputtered on monolayer hBN/SiO2/Si substrate for a varied duration and subjected to thermal annealing. Monolayer hBN is verified by spectroscopic ellipsometry using the Tauc–Lorentz model, while the AuNPs are modeled using a combination of Gauss, Cody–Lorentz, and Tanguy dispersion laws. Sputtering of Au on hBN/SiO2/Si results in a film-like layer compared to the one on SiO2/Si. Before annealing, the improved uniformity of Au on hBN/SiO2/Si diminished the SPR wavelength, [Formula: see text], when the sputter duration exceeded 30 s, much sooner compared to 120 s from the one on SiO2/Si. After annealing, the [Formula: see text] is vibrant for all samples around 2.3 eV. Au dewetted more on hBN due to higher surface tension. Large dewetted AuNPs supported by hBN result in higher photon extinction at [Formula: see text]. The longest sputter duration of 120 s on hBN/SiO2/Si (mean size 53 nm) exhibited an 11.2% higher extinction coefficient compared to the one on SiO2/Si (mean size 39.6 nm). Findings support the advantages of preparing plasmonic AuNPs by dewetting on monolayer hBN.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.