Abstract
ABSTRACTGlow discharge amorphous hydrogenated silicon (a-Si:H) prepared at near room temperature typically results in an inhomogeneous morphology that is undesirable for a number of thin film applications. The most commonly observed features of this include columnar morphology and surface roughness. This usually results from anodic deposition, where substrates are placed on the grounded electrode. We have discovered that placing substrates on the RF-powered electrode (referred to as cathodic deposition) offers a much wider processing range for homogenous growth than anodic growth. We have also found that the magnitude of the surface roughness and the bulk void fraction of both anodic and cathodic a-Si:H thin films processed at low-temperatures is proportional to ∼D/F, where D is the surface diffusivity and F, the adatom flux, though anodic and cathodic deposition affect these global parameters differently. Surface processes unique to cathodic deposition can enhance adatom surface diffusion, while diffusion during anodic deposition is fixed and cannot attain homogeneous growth at high adatom fluxes. Processing a-Si:H on the cathode, associated with enhanced adatom surface diffusion, allows for homogeneous growth even at high deposition rates that has benefits for a number of applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.