Enhanced supercapacitor performance of porous carbon through tuning maceral composition proportion of coal.

Abstract

Porous carbons (PCs) have been widely investigated as electrode materials for supercapacitors. However, during the preparation process, intense pore formation reactions result in an amorphous carbon structure, which limits the rate performance of the electrode material. Herein, coal is chosen as a carbon source and making use of different reaction characteristics of vitrinite and inertinite with a KOH activator, an interconnected porous structure carbon material with an abundant graphite microcrystalline structure is obtained; the organic relationships between the ratio of vitrinite and inertinite, carbonization conditions, material structure and capacity performance were researched. At the ratio of vitrinite to inertinite of 1 : 2, the sample shows a specific surface area of 2507 m2 g-1 and its ID1/IG is 1.31, which is lower than that of raw coal (1.36). Due to the synergistic effect of the pore structure and graphite microcrystals, PC-900-40 exhibits an improved specific capacitance of 229.40 F g-1 at a current density of 1.0 A g-1, and even at a high current density of 10.0 A g-1 it delivers a specific capacitance of 170.04 F g-1. The PC-900-40//PC-900-40 symmetrical capacitor retains 96% of its initial capacitance after 20 000 cycles.