Abstract

The strengthening effect caused by the fine precipitation in microcellular structures during aging heat treatment (AHT) in CoCrFeNiTi-based multiprincipal element alloys fabricated using laser-powder bed fusion (L-PBF) was investigated. L-PBF fabricated products after AHT at 923–1173 K demonstrated hardness of 692 HV, and ultimate tensile strength of 1824 MPa, whereas solution heat-treated products exhibited a hardness of 530 HV and ultimate tensile strength of 1562 MPa. X-ray diffraction, scanning electron microscopy, and scanning transmission electron microscopy demonstrated the presence of intermetallic compounds in the microcellular structures formed during L-PBF solidification. Microcellular structures in as-built specimens accompany dislocation networks and elemental segregation around microcellular walls. The hierarchical structure increases the strengthening effect of AHT by forming a large number of fine multiple intermetallic compounds. AHT after solution heat treatment causes the growth of strengthening nanoscale precipitates in equiaxed grains with a lower amount of grain boundary precipitates. The different responses to AHT in specimens with and without solution heat treatment are important issues for controlling the properties of additively manufactured products.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call