Abstract
Carbonization followed by calcination in air has been developed to synthesize porous SnO2 based nanofibers. The precursor nanofibers were synthesized through electrospinning. The optimal synthesized condition was investigated according to the gas sensing properties of pure SnO2 nanofibers through adjusting the heating rate in air. Gas sensors based on 1% Pd doped SnO2 nanofibers under this optimal synthesized condition were fabricated, and the gas sensing properties was systematically investigated. The experimental results indicate that all the carbonized nanofibers have a porous microstructure. For the pure SnO2 nanofibers, carbonized nanofibers also have a hollow structure. At the optimal synthesized condition, the sensor based on the carbonized SnO2 nanofibers Exhibits 2.6 times higher response (20.4) than pristine pure SnO2 nanofibers (7.7) toward 100 ppm ethanol. However, the selectivity is almost unchanged. For the Pd doped SnO2 nanofibers, the gas response is improved from 10 to 24.6 to 100 ppm toluene at optimum operation temperature under the carbonization process. The sensors also exhibit a low detecting limit (1.6–500 ppb toluene) and a short response time (∼3 s). The evolution process and the formation mechanism were also discussed.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
