Enhanced removal of lead ions from wastewaters by electrochemical adsorption using nitrogen-doped Ti3C2Tx MXene

Abstract

As a two-dimensional material containing transition metal carbides and nitrides, MXene is often used in capacitive deionization for its excellent hydrophilic and pseudocapacitive properties. Nitrogen doping is widely used to improve the adsorption properties of certain materials. However, the effect of nitrogen doping on the electrochemical adsorption properties of MXene remains unclear. In this work, nitrogen-doped Ti3C2Tx MXene was synthesized using a simple hydrothermal method to achieve highly selective and efficient removal of Pb(II) at a constant cell voltage. The concentration of Pb(II) decreased from 4.95 to 0.02 mg L−1 in a 100 mg L−1 NaCl supporting electrolyte after electrosorption. The removal efficiency of Pb(II) reached 99.5 %, whereas it was only 15.2 % for Na+. The introduction of nitrogen functional groups increased the electrical conductivity and layer spacing of MXene, thereby improving the pseudocapacitive adsorption performance in the presence of Pb(II). The complexation function of the TiOH group on nitrogen-doped Ti3C2Tx surface increased and contributed to the selective adsorption of Pb(II). The removal efficiency of Pb(II) increased with increasing solution pH and cell voltage, reaching the maximum value at pH 5.0 and 1.5 V, respectively. The effect of supporting electrolyte type on the removal of Pb(II) was negligible. In addition, the removal efficiency for mixed heavy metal ion solutions, including Cu(II), Ni(II), and Pb(II), exceeded 79.0 %. It exhibited the highest removal efficiency for Pb(II) at 97.9 %. After five cycles of electrochemical adsorption–desorption, the nitrogen-doped Ti3C2Tx maintained a stable Pb(II) removal efficiency of 97.0 %. This work provides a promising material for the electrochemical removal of low-concentration heavy metal ions from wastewaters.