Enhanced precision of real-time control photothermal therapy using cost-effective infrared sensor array and artificial neural network

Abstract

Photothermal therapy (PTT) requires tight thermal dose control to achieve tumor ablation with minimal thermal injury on surrounding healthy tissues. In this study, we proposed a real-time closed-loop system for monitoring and controlling the temperature of PTT using a non-contact infrared thermal sensor array and an artificial neural network (ANN) to induce a predetermined area of thermal damage on the tissue. A cost-effective infrared thermal sensor array was used to monitor the temperature development for feedback control during the treatment. The measured and predicted temperatures were used as inputs of fuzzy control logic controllers that were implemented on an embedded platform (Jetson Nano) for real-time thermal control. Three treatment groups (continuous wave = CW, conventional fuzzy logic = C-Fuzzy, and ANN-based predictive fuzzy logic = P-Fuzzy) were examined and compared to investigate the laser heating performance and collect temperature data for ANN model training. The ex vivo experiments validated the efficiency of fuzzy control with temperature method on maintaining the constant interstitial tissue temperature (80 ± 1.4 °C) at a targeted surface of the tissue. The linear relationship between coagulation areas and the treatment time was indicated in this study, with the averaged coagulation rate of 0.0196 cm2/s. A thermal damage area of 1.32 cm2 (diameter ∼1.3 cm) was observed under P-Fuzzy condition for 200 s, which covered the predetermined thermal damage area (diameter ∼1 cm). The integration of real-time feedback temperature control with predictive ANN could be a feasible approach to precisely induce the preset extent of thermal coagulation for treating papillary thyroid microcarcinoma.