Abstract
Magnetic coagulation is a promising approach for treating high phosphorous (high-P) wastewater by enhancing precipitation efficiency using magnetic particles. In this study, a cost-effective and environmentally friendly magnetic seed from coal fly ash (MS-CFA) was used as an alternative material for Fe3O4 magnetic seed (MS) coagulation. The potential effect of MS-CFA was explored to reduce the settling time and the dosage of coagulant aid of polyacrylamide (PAM) in treating high-phosphorous (high-P) simulated wastewater at 100 and 200 mg P/L. The physicochemical characteristics of MS-CFA were analysed through particle size distribution (20–100 μm), pore size distribution (14–30 nm), specific surface area (1.654 m2/g), X-ray diffraction (XRD), specific gravity (4.2), and magnetic induction intensity (49.8 emu/g). The characteristics met the requirements as magnetic coagulation material. MS-CFA was combined with polyaluminum chloride (PAC) and polyacrylamide (PAM) to improve phosphorous precipitation performance. The synergised magnetic coagulation effect using MS-CFA and PAM reduced the settling time of flocs to less than 1 min due to the high specific gravity. This represents a reduction of 90% of the settling time compared to the control using PAM alone (15 min) without MS-CFA. MS-CFA efficiently reduced PAM dosage by 83% and 87% for treating 100 and 200 mg P/L, respectively. The presence of PAM (1 mg/L for 100 mg P/L and 2 mg/L for 200 mg P/L) was imperative for binding the MS-CFA and flocs, hence increasing the particle size of the magnetic flocs. The characteristics of the magnetic flocs were analysed through microscopy, particle size distribution, zeta potential measurements, and magnetic induction intensity. The characteristics of the magnetic flocs confirmed that MS-CFA could be an alternative material for Fe3O4 as the magnetic seeds in the magnetic coagulation process for treating high-P wastewater.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.