Abstract
As a wide-bandgap rare-earth oxide, Eu2O3 was often utilized as an auxiliary material of other photocatalysts because its photocatalytic performance was limited by the luminescence characteristics of Eu3+ and low light utilization. In this study, we improved the photocatalytic degradation performance of the Eu2O3 nanoparticles by doping with Fe cations. The Eu2O3 nanoparticles with different Fe-doping concentrations (1, 3, and 5%, noted as EF1.0, EF3.0, and EF5.0, respectively) were synthesized via chemical precipitation and calcination methods. It was found that doping could reduce Eu2O3's bandgap, which probably originated from the introduction of oxygen vacancies with lower energy levels than the conduction band of Eu2O3. Compared with the undoped Eu2O3 nanoparticles with a removal efficiency of 22% for degrading rhodamine B dye within 60 min, the photocatalytic degradation efficiencies of EF1.0, EF3.0, and EF5.0 were demonstrated to be improved to 42, 48, and 33%, respectively, and EF3.0's performance was the best. The enhanced photocatalytic performance of the doped samples was related to the oxygen vacancies acting as capture centers for electrons, such that the photogenerated electron-hole pairs were efficiently separated and the redox reactions on the surface of the nanoparticles were enhanced accordingly. Additionally, the enhanced light absorption and broadened spectral band further improved EF3.0's degradation efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
More From: ACS Omega
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.