Abstract

Here we reported the investigation of enhanced performance for the removal of hexavalent chromium (Cr (VI)) by a new microbial fuel cell (MFC) with natural pyrrhotite-coated cathode. By comparisons of the graphite-cathode, the MFCs equipped with a pyrrhotite-coated cathode generated the maximum power density of 45.4 mW·m−2 that was 1.3 times higher than that of with bare graphite cathode (35.5 mW·m−2). Moreover, the Cr (VI) removal efficiency of 97.5% achieved after 4.5 h compared with only 46.1% by graphite cathode MFC. In addition, Cr (VI) removal rate with different initial Cr (VI) concentrations for 10 mg/L and 30 mg/L was investigated and a decreased removal percentage with increasing Cr (VI) concentration was observed. Batches of experiments of different pH values from 3.0 to 9.0 in catholyte were carried out to optimize system performance. The complete Cr (VI) removal was achieved at pH 3.0 and 99.59% of Cr (VI) was removed after 10.5 h, which met the requirement of the Cr (VI) National Emission Standard. When the value of pH was decreasing, the removal rate was obviously increased and Cr (VI) could be removed successfully with a broad pH range indicating pyrrhotite-coated cathode MFC had more extensive usage scope. Furthermore, cathode treatment products were studied by X-ray photoelectron spectroscopy (XPS), Cr2O3, Cr (III)-acetate were detected on the cathode by the XPS Cr2p spectra and no Cr (VI) founded, indicating that the Cr on the surface of cathode was Cr (III) and Cr (VI) were reduced. On cathode, pyrrhotite not only played a significant role for catalyst of MFCs, but also acted as reactive sites for Cr (VI) reduction. Our research demonstrated that pyrrhotite, an earth-abundant and low-cost natural mineral was promised as an effective cathode material. Which had great potential applications in MFCs for reduction of wastewater containing heavy metals and other environmental contaminants in the future.

Highlights

  • Hexavalent chromium (Cr (VI)) is quite widely used by various industrial production applications (Including Chrome ore processing, electroplating, and the leather-making industry) [1,2,3,4]

  • This study demonstrated that natural pyrrhotite was well suitable for microbial fuel cell (MFC) application, allowing sufficiently high current densities, wide availability of raw materials, low cost, easy preparation as well as friendly operating condition

  • Two sets of MFCs equipped with both pyrrhotite-coated graphite cathodes and graphite-coated cathodes were operated simultaneously

Read more

Summary

Introduction

Hexavalent chromium (Cr (VI)) is quite widely used by various industrial production applications (Including Chrome ore processing, electroplating, and the leather-making industry) [1,2,3,4]. A natural environmental mineralogy material-pyrrhotite and the MFC technology was combined together for improving performance of electricity generation and removing Cr (VI) from solution was investigated. This study demonstrated that natural pyrrhotite was well suitable for MFCs application, allowing sufficiently high current densities, wide availability of raw materials, low cost, easy preparation as well as friendly operating condition. This MFCs performs great prospects for research and application for the chromium reduction and electricity production in the future

Manufacture of Pyrrhotite-Coated Graphite Cathode
Experimental System and Pretreatment of Materials
MFCs Start-Up and Operation
The Electricity Production Performance of MFCs
Enhanced
Degradation efficienciesofofCr
Removal efficiencies ofof
Mechanisms
Conclusions
Reduction
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call