Abstract
A series of experiments on the oxidative removal of NO from flue gas using a novel in situ Fenton (IF) system was performed in the presence of ultraviolet light (UV). The comparison tests revealed that the in situ Fenton system facilitated by UV (UV/IF) has a better oxidation ability of NO than that of the IF system due to the photochemical effect on the generation of oxidative species like (OH). Both of the aforementioned oxidation efficiencies were higher than that of the conventional Fenton system (CF) depending on the premix of Fe2+ and H2O2 solutions, which attribute to the improvement of (OH) yield and valid utilization with continuous addition of fresh reagents and UV radiation. In follow-up experiments, the effects of UV power, gas flow rate, reagent temperature, Fe2+/H2O2 molar ratio, initial pH, initial concentration of NO and SO2 and volume fraction O2 and CO2 on the oxidative removal of NO by UV/IF method were investigated respectively. Moreover, the results of kinetic analysis indicated that NO oxidation was confirmed to have a pseudo-first-order kinetics pattern. The rate constants decreased slightly with increasing liquid temperature, and then the apparent activation energy of NO oxidation reactions in the UV/IF system was calculated as -5.62kJ/mol by the Arrhenius equation. Furthermore, the reaction mechanism and application prospects concerning NO oxidative removal by using the UV/IF system was speculated in brief. Finally, the computational fluid dynamics (CFD) simulations revealed that the improvement of axial and radial gas hold-up would enhance the gas-liquid contact and accelerate the oxidation reactions on the interface. In addition to reasonable control of process parameters, the optimization of reactor interior structure needs to be carried out via CFD simulation and experimental validation in future research, both are favourable to promote the NO oxidation efficiency and large-scale development of this technology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.