Abstract

The light to be trapped inside light-emitting diodes (LEDs) greatly affects the luminous efficiency and device lifetime. Abrupt difference in refractive index between the sapphire substrate and GaN-based LEDs causes light trapping by total internal reflection, however, its optical loss has been taken for granted. In this study, we demonstrate that nanoporous GaN can be used as a refractive-index-matching layer to enhance the light transmittance at the sapphire–GaN interface in InGaN/GaN flip-chip light-emitting diodes (FCLEDs). The porosity and the refractive index of the nanoporous GaN layer are controlled by electrochemical etching of n-type GaN layer. The optical output power of FCLEDs with the nanoporous GaN layer grown on flat and patterned sapphire substrates is increased by 355% and 65% at an injection current of 20 mA, respectively, compared with that of an FCLED without the nanoporous GaN layer. The remarkable enhancement of optical output is mostly attributed to the nanoporous GaN layer which drastically increases the light extraction efficiency by decreasing the reflection of light at the sapphire–GaN interface.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.