Abstract
A cubic Stewart platform with an image sensor meausring is proposed for a line-of-sight (LOS) pointing and stabilization. The charge couple device (CCD) as a image sensor mounted on the Stewart platform can provide the LOS error only in the azimuth and elevation directions, so a decoupled control strategy through the transformation of the Jacobian matrix is introduced to transform a Multiple-Input Multiple-Output (MIMO) control into Single-Input Single-Output (SISO) control. Due to the low bandwidth of the Stewart platform and the finite sampling rate of the CCD, the closed-loop performance is greatly restricted. An optimal observer control based on Youla parameterization is proposed to improve the tracking performance in the CCD-based Stewart platform control system. This improved controller relies on the LOS error combined with the controller output to produce high gain, plugging into the tradditional closed-loop structure, which results in minimizing the error attenuation function by designing an appropriate Q-filter. Both the simulations and experiments are carried out to prove the effectiveness of the proposed observer compared with the classical feedback controller.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.