Abstract
Foam injection has been a proven technique for IOR in light oil reservoirs, while for heavy oil reservoirs, enhanced foams are needed. In this study, a polymer enhanced foam system was evaluated via comprehensive laboratory experiments and a field pilot testing. Water flooding has been applied in the targeted oilfield (featured with high oil viscosity and severe heterogeneity), but low recovery factor (<20%) and high water cut (over 85%) has been observed. The pilot testing of the foam injection indicates that nearly all producers around the injector exhibited good response with incremental oil recovery and the average water cut dropped by 6.3%. The experimental and field pilot data are presented to demonstrate the effectiveness of the enhanced nitrogen foam injection technique, which can be an effective IOR method for the targeted oilfield and other similar viscous oil reservoirs. [Received: January 2, 2017; Accepted: November 18, 2017]
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Oil, Gas and Coal Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
