Abstract

A facile method of combining the defect engineering with the dielectric-screening effect is proposed to improve the electrical performance of MoS2 transistors. It is found that the carrier mobility of the transistor after the sulfur treatment on the MoS2 channel is greatly enhanced due to the reduction of the sulfur vacancies during vulcanization of MoS2. Furthermore, as compared to those transistors with HfO2 and SiO2 as the gate dielectric, the Al2O3-gate dielectric MoS2 FET shows a better electrical performance after the sulfur treatment, with a lowered subthreshold swing of 179.4 mV/dec, an increased on/off ratio of 2.11×106, and an enhanced carrier mobility of 64.74 cm2/V⋅s (about twice increase relative to the non-treated MoS2 transistor with SiO2 as the gate dielectric). These are mainly attributed to the fact that a suitable k-value gate dielectric can produce a dominant dielectric-screening effect overwhelming the phonon scattering, increasing the carrier mobility, while a larger k-value gate dielectric will enhance the phonon scattering to counteract the dielectric-screening effect, reducing the carrier mobility.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.