Abstract
Emissions of the inhalable particle (dp < 10 μm, PM10) and their harmful compositions from combustion sources have high potential on health risk with nearly no regulation. This study investigates the particle size distribution (PSD), as well as the removal mechanism of PM10 and fine particle (FP)-bound polycyclic aromatic hydrocarbons (PAHs) from the flue gas of a hazardous waste thermal treatment system. It has ultralow regulated emission and becomes a candidate of power generation module. A series of the advanced scrubbers, cyclonic demister, and baghouse was equipped for multi-pollutant control. The moderate or intense low oxygen dilution (MILD) combustion effectively inhibited the PM2.5 generation by volumetric oxidation. Advanced scrubbers removed PM1, PM2.5, and PM10 by 85.24, 68.68, and 97.60%, respectively, which achieved by local supersaturation, heterogeneous condensation of water vapor, and the growth of fine PM. Moreover, the scrubbers effectively scavenged the course PM10 containing the high-molecular-weight PAH homologs onto the water phase but promoted the condensation and absorption of the lighter homologs onto the fine particle surface (dp ∼5.3 μm). The size window (dp = 0.3–1.0 μm) of the minimum efficiency reporting value of a BH filtration led to the peak of FP-PAH mass and BaP equivalent (BaPeq) toxicity at dp = 0.1–0.4 and 0.1–0.8 μm, respectively. Consequently, the synergy of MILD combustion and the SCB-CYC-BH system effectively inhibited the PM2.5, PM10, PM2.5-PAHs, and FP-PAH levels from a waste thermal treatment process and further mitigated the potential health risk.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.