Enhanced mechanical properties of polyphenylene sulfide and liquid crystal polymer composites by interfacial bonding capacity of graft‐modified graphene oxide and glass fibers

Abstract

AbstractThe aim of this study is to broaden the potential applications of polyphenylene sulfide (PPS) by incorporating graphene oxide (GO)‐grafted glass fiber (GF) to enhance the mechanical properties of liquid crystal polymer (LCP)/PPS composites. The surface of GF was modified using γ‐Aminopropyltriethoxysilane (KH550), allowing for the grafting of GO. Subsequently, GO‐GF/LCP/PPS composites were prepared through extrusion injection molding. The properties of the composites were evaluated using scanning electron microscopy, differential scanning calorimetry, and thermogravimetric analysis. The findings indicate that the interfacial adhesion between GF and composites is significantly improved with the addition of GO, The mass fractions of GO used were 0.1%, 0.5%, and 0.7%. The incorporation of GO‐grafted GF proves to be an effective approach in enhancing the tensile and flexural strengths of LCP/PPS composites. Additionally, a reduction in wear volume and tribological coefficient is observed compared to composites without GO‐treated GF. Notably, when the GO content is 0.5 wt%, the mechanical properties of the composites show significant improvement, with a 50% increase in impact strength compared to the composite without GO, and a decrease in friction coefficient from 0.28 to 0.22.