Abstract

In this work, an elastomeric Fe3O4 nano-particles (NPs)/polybutadiene rubber (BR) composite membrane was prepared by using the combined technique of electrospinning and in-situ crosslinking. The results showed that the saturation magnetization (Ms) and the coercive force (Hc) of the electrospun composite membrane with 5 wt.% Fe3O4 NPs was increased by 21 % and 69 %, respectively, comparing with the membrane prepared by solution casting. This was ascribed to the fine nano-dispersion of Fe3O4 NPs in BR matrix by using the electrospinning and in-situ crosslinking technique because the re-aggregation of Fe3O4 NPs was largely restrained by the fast evaporation of solvent, the confined space of nano/micro-sized fibers and the rapid crosslinking during electrospinning. Our work demonstrated that electrospinning and in-situ crosslinking is a simple and efficient method to improve the dispersion of nanoparticles in an elastomer matrix, and thus prepare high performance elastomeric nanocomposite.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.