Abstract
In the present study, we demonstrated a novel process of in-situ fabrication of graphene sheets by adopting the chemical vapor deposition (CVD) method. Fabricating such a layer of vertical graphene sheets (VGs) on the surface of microcrystalline diamond (MCD) films could decrease the stable coefficient of friction (COF) by 20–30%. Besides, such lubricity showed excellent load capacity and durability. With normal loads ranging from 3 N to 9 N (Hertz contact pressure of 2.1–3.1 GPa), the MCD-VGs films exhibited COFs stabilized at 0.105 and wear rates less than 5 × 10−6 mm3 N−1 m−1. Additionally, the produced VGs displayed an excellent service lifetime with 72,000 sliding cycles. During the friction tests, an equilibrium graphene self-mated contact formed on the sliding interface as graphene fragments adhered onto the counterpart ball and resulted in the reduction of friction and low wear rates. Additionally, the mixtures of Si3N4/SiO2 particles and graphene sheets residual within the wear tracks would promote the transformation of the sliding regime to three-body abrasion, beneficial for friction reduction. The findings presented in this study provide a novel and effective approach to enhance the lubricity of any engineering diamond surface.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
