Abstract
AbstractIn order to improve the interfacial adhesion between aramid fiber (AF) and rubber matrix, a simple and facile method of aramid nanofiber (ANF) coating is demonstrated in this article. Tannic acid (TA) and polyethyleneimine (PEI) are polymerized in an alkaline solution to form a thin TA/PEI (TP) layer that is deposited on the surface of AF to introduce functional groups such as hydroxyl and amino groups. Then, the ANF coating is utilized to construct nanostructures on the surface of AF to improve the interfacial adhesion between the fiber and the rubber. Through hydrogen bonding and/or π‐π stacking between the TP layer and the ANF, the ANF coating is firmly attached to the surface of AF. Compared with the untreated fiber, the interfacial adhesion of AF coated with ANF after 1, 3, 5, 7, 9 deposition cycles is increased by 27.8%, 29.1%, 31.5%, 43.1%, and 30.3%, and the mechanical properties of the fibers remain almost unchanged. This method shows its advantages of simple, facile, and time‐effective, which is of great significance for industrial applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have