Enhanced hole injection and improved performance in organic light-emitting devices by utilizing a novel composite hole injection layer

Abstract

Organic light-emitting devices (OLEDs) with MoO x , Ag 2O and a composite layer consisting of Ag 2O//MoO x as hole injection layers (HIL) have been investigated. We have observed that the insertion of such a composite layer leads to a striking improvement in the electrical properties with lower driving voltage, higher power and current efficiencies. At a current density of 20 mA/cm 2, the driving voltage of the device using an Ag 2O//MoO x composite HIL (Cell-AM) is 5.9 V, which is 2.2 V, 3.8 V and 4.5 V lower than that of the devices using MoOx (Cell-M), Ag 2O (Cell-A) as HIL and the device (Cell-I) without HIL, respectively. Its power efficiency is 2.56 Lm/W, which is 1.8, 2.4 and 3.6 times higher than that of Cell-M, Cell-A, and Cell-I, respectively. The current efficiency is 4.88 cd/A, which is 33.7%, 58.4% and 110.3% higher than Cell-M, Cell-A, and Cell-I, respectively. These improvements are attributed to its high hole injection ability. The result is verified by using the J – V curves of ‘only’ devices and further explained with the help of the Fowler–Nordheim (F–N) tunneling theory.