Abstract
Abstract Environmentally friendly foams have been studied extensively to handle the plastic pollution caused by disposable tableware. Herein, biodegradable poly (lactic acid) (PLA) – poly (butylene adipate-co-terephthalate) (PBAT) composites were first fabricated by melt blending, in which a reactive chain extender (ADR) was incorporated to enhance the interfacial compatibility and melt strength, a nucleating agent (TMC) was applied to improve the crystallinity. Subsequently, the foaming behavior of the composites was investigated via supercritical CO2 foaming. Specifically, a spherulite and shish-kebab-like nanoporous structure was observed from PLA and PLA/TMC foams, respectively, when the soaking temperature was far below melting temperature. With an increase of foaming temperature, the unmelted completely crystals served as physical cross-linking points, also contributing to a high melt strength. Combined with chain extension reaction of ADR, the PLA–PBAT/ADR/TMC foams showed the largest cell diameter and expansion ratio, which were 19 μm and 8.9, respectively. Furthermore, the heat resistance of PLA–PBAT/ADR/TMC foams was also significantly improved, owing to the high crystallinity induced by TMC. Consequently, the composite foams with superior heat resistance and toughness were obtained to broaden its application as biodegradable disposable tableware for hot food.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
