Abstract
Ni-doped ZnO nanowire arrays (Ni-ZnO NRs) with different Ni concentrations are grown on etched fluorine-doped tin oxide electrodes by the hydrothermal method. The Ni-ZnO NRs with a nickel precursor concentration of 0-12 at. % are adjusted to improve the selectivity and response of the devices. The NRs' morphology and microstructure are investigated by scanning electron microscopy and high-resolution transmission electron microscopy. The sensitive property of the Ni-ZnO NRs is measured. It is found that the Ni-ZnO NRs with an 8 at. % Ni precursor concentration have high selectivity for H2S and a large response of 68.9 at 250 °C compared to other gases including ethanol, acetone, toluene, and nitrogen dioxide. Their response/recovery time is 75/54 s. The sensing mechanism is discussed in terms of doping concentration, optimum operating temperature, gas type, and gas concentration. The enhanced performance is related to the regularity degree of the array and the doped Ni3+ and Ni2+ ions, which increases the active sites for oxygen and target gas adsorption on the surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.