Abstract
We systematically investigated the effects of process conditions and reduced graphene oxide (RGO) loading on the H2S gas-sensing performance of the α-Fe2O3 nanofibers (NFs) fabricated via on-chip electrospinning. The annealing temperature and precursor solution contents strongly influenced on the morphology and structure of the α-Fe2O3 NFs that accordingly affected on the gas-sensing performance. The optimum process conditions with the annealing temperature of 600 °C and the precursor solution contents of 11 wt% PVA and 4.0 wt% Fe(NO3)3.9H2O led to the α-Fe2O3 NF sensors having a high response of ∼6.1 at 1 ppm H2S gas. The RGO loading further improved the gas response, increasing the response to 1 ppm H2S gas up to ∼9.2. Also, the RGO-loaded α-Fe2O3 NF sensors enhanced their selectivity and detection limit as compared with pure α-Fe2O3 NF sensors. The enhanced gas-sensing performance was attributed to the presence of nanograins, the increase of surface-to-volume ratio and the formation of potential barriers at nanograin homojunctions and RGO/α-Fe2O3 heterojunctions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
