Abstract
Carbon fiber reinforced poly(urethane‐isocyanurate)‐nanosilica composites CF‐(PUI‐NS) were manufactured by means of the vacuum‐assisted resin transfer moulding technique (VARTM) at very low NS concentrations (0–4 wt%). The high strain to failure of the PUI matrix (>7%) affected tensile tests by CF reorientation. Both the tensile strength and strain to failure were highly dependent on its kinematics. CF(PUI‐NS) caused an increase of the static toughness with a maximum improvement of tensile strain to failure and modulus of +28.8% and +39% at 1 wt% and 2 wt% of NS, respectively. The interlaminar shear strength (GIC) of the composites showed both a deterioration of −12.9% and an improvement of +9.9% for NS concentrations of 1 wt% and 4 wt%, respectively. Regardless of the GIC value, all of the composites prepared with NS presented secondary maxima of the force versus displacement plots, indicating a substantial arrest of the crack propagation velocity after delamination started. Fractographic analysis revealed several features, such as fiber pull‐out, bridging as well as river patterns whereas the composites prepared with NS behaved in a more ductile fashion due to the presence of river patterns and a reduced fiber pull‐out. POLYM. ENG. SCI., 58:1241–1250, 2018. © 2017 Society of Plastics Engineers
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
