Enhanced field emission characteristics of WS2 nano-films by diamond film and Mo film

Abstract

WS2 is a type of transition metal chalcogenide materials (TMDCs) that exhibits exceptional photoelectric properties. Due to its atomically sharp edges, WS2 has the capability to enhance the electric field around its edges, thus presenting significant potential in field emission applications. In this study, the electron beam vapor deposition (EBVD) system and microwave plasma chemical vapor deposition (MPCVD) system were used to prepare a series of single-layer WS2 films，single-layer diamond films and diamond/WS2 nano-composite films on N-type highly doped Si substrate, and Mo/WS2 nano-composite films were prepared on Al2O3 ceramic substrate. Based on the characterization and analysis of the microstructure and chemical composition of each thin film layer in the above film devices, the field emission (FE) characteristics of each thin film device are compared and studied. The results demonstrate that the maximum FE current density of diamond/WS2 nano-composite film device is 912 μA/cm2, which is 2.7 times of the maximum FE current density of Mo/WS2 nano-composite film device 330 μA/cm2, and 3.4 times of the maximum FE current density of the single-layer diamond thin film device 267 μA/cm2. The single layer WS2 film did not exhibit measurable FE performance. The working principles of thin film field emission devices with various structures are introduced. It is considered that the diamond layer plays the role of electron accelerating layer, which not only effectively improves the FE characteristics of diamond/WS2 nanocomposite film, but also improves the repeatability and long-term stability of diamond/WS2 nanocomposite film FE devices.