Abstract

Temperature is extremely significant for electrocatalysis, but heat will cause deformation and failure of catalysts. To intensify reaction and decrease thermal deformation for hydrogen production, Ni3S2 nanorods (NS NRs) arrays were prepared by electrochemical co-deposition, dealloying and vulcanization, and further covered with a film of a negative thermal expansion (NTE) material of Al2(WO4)3 via a facile deposition method to obtain rod@shell three-dimensional (3 D) structured Ni3S2@Al2(WO4)3 (NSAW) NRs catalysts which connect a nickel substrate without binder. The physicochemical properties and electrocatalytic performance of the as-obtained NRs were evaluated using various techniques, and the enhanced mechanism was proposed based on multifarious results under different conditions. The hydrogen production rate of NSAW is increased 61% as temperature increases from 25 to 95 °C. Compared to the NS NRs, the hydrogen evolution reaction (HER) overpotential at 10 mA/cm2 is reduced to about 95 mV at 95 °C, and the Rct is decreased 84.7%, while the Faraday current efficiency is improved to 86.2%. Al2(WO4)3 protects NS well from breakdown during cycles in heating circumstances to improve catalytic performance and long-term stability. The work supplies an effective strategy to enhance the performance of catalysts at high temperature.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call