Abstract
AbstractThe electrical switching and electrochromic phenomena of a novel nanocomposite comprising poly(p‐phenylenebenzobisthiazole) (PBZT) and tungsten oxide (WO3) nanoparticles are investigated as a function of the nanoparticle loading. Both dissolving PBZT and doping PBZT backbone structure with acid are achieved by one simple step. Chlorosulfonic acid (CSA) is used as a solvent and spontaneously transformed to sulfuric acid upon exposure to moisture. The formed sulfuric acid serves as doping agent to improve the electrical conductivity of PBZT. The most significant enhancement of electrical switching is observed in the nanocomposites with low weight fraction (5%). The electrical conductivity of 5% WO3/PBZT nanocomposite thin film is increased by about 200 times and 2 times, respectively, as compared to those of the as‐received PBZT and PBZT/CSA thin films. As the nanoparticle loading increases to 20% and 30%, the nanocomposites follow an ohmic conduction mechanism. Stable electrical conductivity switching is observed before and after applying a bias on the pristine PBZT and WO3/PBZT nanocomposite thin films. Electrochromic phenomena of both PBZT and WO3/PBZT nanocomposite thin films with high contrast ratio are observed after applying a bias (3 V). The mechanisms of the nanoparticles in enhancing the electrical switching and electrochromic properties are proposed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.