Abstract

This study deals with the improvement of electric field-induced thickness strain of polyurethane (PU) elastomer films by carbon black (C) nanopowder incorporation in the polymer matrix. Different carbon volume concentrations—0.5, 0.7, 1 and 1.5%—have been tested. Weak-field dielectric and resistivity measurements revealed that a percolative effect is not induced by carbon filling up to 1.5 vol%. Thickness strain measurements showed that both pure PU and C/PU composite films exhibit similar strain variations which are not governed only by electrostatic forces (Maxwell stress) and/or electrostriction forces. The highest strain amplitude value observed was obtained for 1% C composite thin film (Sa = −7.4% at E = 17.8 kV mm−1). In comparison the highest Sa for pure PU thin film was −6.7% at E = 37.5 kV mm−1). In the case of thick samples, the thickness strain was not enhanced by C loading, which strongly suggests interfacial space charge effects in pure PU film, confirmed by the frequency dependence of strain level.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call