Abstract
AbstractDue to the limitation of traditional microlens arrays (MLAs) in integral imaging display, the depth of field (DOF) is restricted in space and the center depth plane is difficult to extend in a large range. Here, we propose a microfabrication method based on bifocal MLAs to improve DOF. The bifocal MLAs for extended DOF were fabricated by using two‐step photolithography and thermal reflow. This method allows diverse microlenses of high to low numerical aperture to achieve high spatial resolution as well as accurate depth estimation. Microlenses of different focal lengths were simultaneously deposited on a substrate by repeated photolithography with multiple photomasks with alignment mark to define micro‐posts of different thicknesses. Hexagonally packaged bifocal MLAs clearly show the DOF extended from 0.004 to 4.908 mm for 57.6 μm in lens diameter, and their corresponding object distance ranges from 0.125 to 0.165 mm. Based on the proposed scheme, this method provides potential applications in integral imaging 3D display or light field display.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
