Abstract
Magnesium hydride (MgH2) has been proposed as a promising hydrogen storage material due to its high hydrogen capacity. However, its application is hindered by sluggish kinetics and high dehydrogenation temperature. Herein, we report the successful preparation of the Fe containing MgH2 solid solution by milling method, and systematically investigate the dehydrogenation properties and mechanism of the composite through experiments and first principle calculations. The results show that the serious lattice distortion and charge transfer caused by Fe atoms lead to the instability of MgH2, significantly improving the dehydrogenation kinetics of MgH2. As a result, the dehydrogenation activation energy of MgH2–Fe composite was successfully reduced by 44.5%. Notably, the initial dehydrogenation temperature of the composites is nearly 200 °C lower than that of pure MgH2, and 4.5 wt% of H2 can be released at 230 °C for 30 min. These findings provide novel insights for designing simple, low-cost catalysts for MgH2 synthesis.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.