Enhanced CO2 separation performance of mixed matrix membrane by incorporating amine‐functionalized silica filler

Abstract

AbstractMixed matrix membranes (MMMs) owing to the tunable characteristics and functionalization ability can effectively substitute the highly intensive conventional membranes for industrial‐scale CO2 separation. Further, to strengthen the interfacial polymer‐filler interaction, an interfacial design strategy incorporating active functional groups in the filler surface can be demonstrated. In this study, as‐synthesized silica nanoparticles (SNPs) was surface functionalized by (3‐aminopropyl) trimethoxysilane silica modifier (AFSNP). The CO2 separation of poly (vinyl alcohol)/polyethylene glycol based MMM infused with surface‐functionalized SNP (AFSNP) was conducted. The comparative study highlighted in‐depth analysis of intrinsic physicochemical properties of as‐synthesized membranes and nanoparticles. Detailed characterization such as advanced microscopic analysis, X‐ray photoelectron spectroscopy (XPS) analysis and ninhydrin assay validated the successful grafting of amino groups onto the silica surface. The morphological inspection corroborated the consistent dispersion ability of the nanoparticles in the membrane matrix. The effect of the operating conditions on the membrane selectivity and CO2 permeance were statistically analyzed by ANOVA. The CO2 permeation result (CO2 permeance and CO2/N2 selectivity) exhibited many fold increment with surface functionalization of SNPs compared to undoped silica MMM. The defect‐free, performance‐oriented CO2‐selective membrane thus opened up the possibility of this combination as a prospective contender for large‐scale carbon capture studies.