Abstract
The ordinary superhydrophobic coating exhibits insufficient anti-icing properties in the low temperature and high humidity environment and poor corrosion resistance after long-term immersion. In this work, the modified nano-silica superhydrophobic coating with the large area micropillar array structure was constructed innovatively on the fluorocarbon varnish coating by a straightforward net embossing method and layer-by-layer assembly techniques to remedy these deficiencies. The anti-icing test results showed that the micropillar array structures could reduce the contact area between water droplets and cold surfaces. It also generates a stronger air cushion effect, which effectively delayed the freezing time and decreased the deicing shear force. Meanwhile, a larger microgroove density per unit area was achieved by reducing the micropillar widths, which further increased the freezing delay time, enhanced icephobic stability, and decreased the deicing shear force. The results of electrochemical impedance spectroscopy test showed that the infiltration of the corrosive medium was delayed by a large amount of air trapped in the microgrooves, so the impedance modulus values were still above 1011 Ω·cm2 after 26 days of immersion in 3.5 wt% NaCl solution. This work provides a new idea for improving the anti-icing properties and corrosion resistance of superhydrophobic coatings by constructing a large area of micropillar array structures on organic coatings.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.