Abstract
In this study, the optimum ammonium removal by activation of synthetic zeolite in the aqueous phase was investigated by batch ion exchange adsorption assay, and its surface changes due to activation modification was elucidated accordingly. Among the adsorbents examined, modified synthetic zeolite A-4 was the most effective at ammonium removal. The best activation condition of zeolite A-4 was established by Na+ and 300 °C heat treatment at pH around 6 to 7. Besides, the removal efficiency was investigated under various reaction conditions of pH, adsorbent dosage, stirring speed, and initial ammonium concentration. Finally, the adsorptive capacity Qe of synthetic zeolite A-4 activated by Na+ and heat treatment was determined as 31.9 mg/g at 1,000 mg-N/L of ammonium, whereas that of natural zeolite was measured as 16.0 mg/g. The obtained adsorption data was fitted to both Langmuir and Freundlich isotherm models, and the Langmuir isotherm model provided a better correspondence than the Freundlich isotherm. Finally, regeneration cycles for synthetic zeolite A-4 was determined for further industrial applications and efficient ammonium removal.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
