Enhanced air sparging for groundwater remediation using alginate gel-based removable hydraulic barriers

Abstract

The objective of this study was to investigate the effect of a removable physical barrier on the air sparging performance using a lab-scale aquifer model was investigated. The barrier was installed in water-saturated porous media, prior to the air sparging, by injecting calcium chloride aqueous solution into the aquifer with pre-applied alginate solution. Changes in the air flow direction and air flux at the media surface during air sparging were evaluated. With a hydrogel barrier set at the center of the media, the airflow detoured the barrier resulting in a bimodal air flux distribution at the media surface. While employing two gel-formed barriers positioned away from the media's center, the airflow concentrated specifically on the gap between the barriers. The hydrogel was successfully removed using a sodium bicarbonate solution (1.0 mol/L). Using the hydrogel barrier, the performance of air sparging was significantly enhanced for removing contaminants [tetrachloroethene (PCE) and n-hexane mixture] due to increased air flux; 9.8% of PCE applied (7.8 g) was removed during 120 min air sprging for the gel barrier system whereas no PCE was removed for the control. Alginate gel did not show significant sorption capacity for PCE. It was stable in the contaminant up to 68 days with reasonable loss of its mass. Findings of this study present a promising option for air sparging process specifically targeting the contaminant source zone in the aquifer.