Abstract
This study investigated the adsorption of methylene blue with natural and artificial zeolite. The effect of pH, contact time, initial concentration and adsorbent dose on adsorption was also investigated. An artificial dye was prepared. Adsorption removal efficiency was low at pH = 2, 3 and 4 but it was quite high at pH = 7. It was determined that the contact time reaches equilibrium within 60 minutes in the adsorption of methylene blue with natural and artificial zeolite. The initial dyestuff concentration for both adsorbents was 5 mg/L. For the removal of methylene blue, a 0.5 g natural and artificial zeolite dosage was sufficient. In order to express the adsorption of natural and artificial zeolite on methylene blue, Langmuir, Freundlich, Temkin and Dubinin-Radushkevich (D-R) isotherm models were examined. In the isotherm study, both natural and artificial zeolite adapted to the Langmuir isotherm model. Langmuir correlation coefficient was 0.998 for artificial zeolite and 0.993 for natural zeolite. Both adsorbent materials best fit into the pseudo-second kinetic model with similar correlation coefficient values of 0.999.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
