Abstract
Special equipment vehicles typically operate in complex environments, leading to wear and failure of the chassis's rotary seal shaft predominantly made of soft AISI 1045 steel. An effective approach to prolong the service life is to apply a hard coating on the working surface. Previous research have primarily concentrated on the coating for hard high-speed steel. However, the significant disparity in physical characteristics between soft AISI 1045 steel and the hard coating results in a weak interface adhesion. This study produces a CrN/W-DLC/DLC multilayer coating on the soft AISI 1045 steel with strong interfacial adhesion and superior friction and wear property through modulation of the CrN transition layer thickness. The multilayer coating consists of five layers, a CrN transition layer, a Cr layer, a Cr/WC alternating layer, a W-DLC/DLC alternating layer, and the topmost DLC layer. The thickest CrN interlayer coating achieves the Lc2 and Lc3 value of 13.9 ± 0.2 N and 20.4 ± 0.9 N. The optimized CrN/W-DLC/DLC coating reduces the internal stress of the DLC coating and enhances its adhesion. Importantly, the average friction coefficient and wear cross-sectional area of the CrN/W-DLC/DLC multilayer coatings decrease accordingly. The thickest CrN interlayer coating exhibits superior outstanding wear resistance evidenced by an average friction coefficient of 0.119, a steady-state friction coefficient of 0.097 and a wear volume of 1.508 × 106 μm3. The presence of a high proportion of sp2 bonds in the thickest CrN interlayer coating, which are susceptible to graphitization, along with a thicker transition layer that enhances the coating's support, leads to narrower wear traces. The primary wear mechanisms observed in the friction and wear test of CrN/W-DLC/DLC coatings are oxidative wear and tribo-abrasive wear. The work provides a significant promise for application in vehicle rotary seal components and a theoretical reference for enhancing the wear resistance of the seal surface.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
