Abstract
In the present study, the drag variation and trajectory elements estimation of a supersonic projectile having two different nose shapes are made numerically. The study aims at finding the coefficient of drag and shock wave pattern for 130 mm artillery shell fitted with recovery plug or with fuze, when travelling at zero angle of attack in a supersonic flow of air. The coefficient of drag (CD) obtained from the simulation is used as an input parameter for estimation of trajectory elements. The numerical results, i.e., the coefficient of drag at different Mach numbers and trajectory elements are validated with the data recorded by tracking radar from an experimental firing. Based on numerical results and data recorded in experimental firing, the coefficient of drag in the case of the shell with recovery plug is 2.7 times more than for the shell with fuze. The shock wave in the case of the shell with recovery plug is detached bow shock wave, whereas in the case of a shell with fuze, the shock is attached. The results indicate that the coefficient of drag increases with detached shock wave and an increase in the radius of the shell nose. Good agreements were observed between numerical results and experimental observations. Defence Science Journal, Vol. 64, No. 6, November 2014, pp.502-508, DOI:http://dx.doi.org/10.14429/dsj.64.8110
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.